欢迎来到上海环静减震器有限公司官方网站!详情请致电 021-6999-0533
时间:04-09阅读次数:218责任编辑:远航 所属栏目:单球体橡胶接头
导读:昆明,享春城之美誉,云南省会,是云南省政治、经济、文化、科技、交通中心,西部地区重要的中心城市和旅游、商贸城市,亦是中国面向东南亚、南亚、东盟开放的重要枢纽城市。昆明地处
昆明,享春城之美誉,云南省会,是云南省政治、经济、文化、科技、交通中心,西部地区重要的中心城市和旅游、商贸城市,亦是中国面向东南亚、南亚、东盟开放的重要枢纽城市。昆明地处云贵高原中部,是滇中城市群的核心圈、亚洲5小时航空圈的中心,~一级物流园区布局城市之一。昆明市为山原地貌。地势大致北高南低,多溶洞和溶岩地貌,溶岩盆地有石林坝子。属北亚热带低纬高原山地季风气候。年平均气温16.5℃,年均降雨量1450毫米,无霜期278天,气候宜人。昆明市是灵秀而迷人的,它三面环山,南濒滇池,湖光山色,天然成趣。滇池是云南省大的高原湖泊,全国第六大淡水湖泊,沿湖两岸风光绮丽。由于地处低纬高原而形成“四季如春”的气候,特别是有高原湖泊滇池在调节着温湿度,使这里空气清新、天高云淡、阳光明媚、鲜花常开。昆明市开放而时尚,浓缩了云南的区位优势,从两千多年前的“南方丝绸之路”到开放的昆明一直是东亚大陆与中南半岛、南亚次大陆各国进行经济贸易往来及政治联系的陆路枢纽。“中国昆明出口商品交易会”、“中国旅游交易会”、“中国昆明旅游节”使昆明成为中国主要的会展城市之一。
[替换
项目Item |型号Medol | KXT-1 | KXT-2 | KXT-3 | A、如介质油,酸碱物质 B、工作温度有特殊要求 C、也可来函来图定制 D、订货时需说明 A. If media is oil, acid or alkali. B. If special requirements for working temperature C. If OEM orders with drawings or samples D. Please Inform us about above when ordering |
工作压力MpaWoring pressure | 1.0(10) | 1.6(16) | 2.5(25) | |
爆破压力Mpa Burst Pressure | 2.0(20) | 3.0(30) | 4.5(45) | |
真空度 Kpa Vacuum | 53.3(400) | 86.7(650) | 100(750) | |
适用温度℃Applicable Temperature | -20℃~+115℃(特殊可达-30℃~+250℃)-20℃~+115℃(-30℃~+250℃ under special conditions) | |||
适用介质Applicable Medium | 空气、压缩空气、水、海水、热水、油、酸、碱等Air, compressed air, water, sea water, oil, acid, alkali, etc. | |||
注:主要零件材料同KXT型 Note: the materials of main parts are the same with those of KXT type |
公称通径DN Nominal Diameter (mm) |
长度 LengthLmm |
特殊长度 LengthLmm |
轴向位移 Axial displacement mm |
横向位移 Haorizontal isplacement mm |
偏转角度 Angular deflection(a1+a2)° |
||
mm |
英寸inch |
伸长Extension | 压缩Compression | ||||
32 | 1.25 | 95 | 130/150 | 6 | 9 | 9 | 15 |
40 | 1.5 | 95 | 130/150 | 6 | 10 | 9 | 15 |
50 | 2 | 105 | 130/150/200 | 7 | 10 | 10 | 15 |
65 | 2.5 | 115 | 130/150/200 | 7 | 13 | 11 | 15 |
80 | 3 | 135 | 130/150/200 | 8 | 15 | 12 | 15 |
100 | 4 | 150 | 130/200 | 10 | 19 | 13 | 15 |
125 | 5 | 165 | 130/150/200 | 12 | 19 | 13 | 15 |
150 | 6 | 180 | 130/150/200 | 12 | 20 | 14 | 15 |
175 | 7 | 200 | / | 12 | 20 | 14 | 15 |
200 | 8 | 200 | 130/150/210 | 16 | 25 | 22 | 15 |
225 | 9 | 200 | / | 16 | 25 | 22 | 15 |
250 | 10 | 230 | 130/150/200 | 16 | 25 | 22 | 15 |
300 | 12 | 245 | 130/150/200 | 16 | 25 | 22 | 15 |
350 | 14 | 255 | 130/150/200 | 16 | 25 | 22 | 15 |
400 | 16 | 255 | 200 | 16 | 25 | 22 | 15 |
450 | 18 | 255 | 200 | 16 | 25 | 22 | 15 |
500 | 20 | 255 | 200 | 16 | 25 | 22 | 15 |
550 | 22 | 255 | / | 16 | 25 | 22 | 15 |
600 | 24 | 260 | 200 | 16 | 25 | 22 | 15 |
700 | 28 | 260 | / | 16 | 25 | 22 | 15 |
800 | 32 | 260 | / | 16 | 25 | 22 | 15 |
900 | 36 | 260 | / | 16 | 25 | 22 | 15 |
1000 | 40 | 260 | / | 18 | 26 | 24 | 15 |
1200 | 48 | 260 | / | 18 | 26 | 24 | 15 |
1400 | 56 | 350 | / | 20 | 28 | 26 | 15 |
1600 | 64 | 350 | / | 25 | 35 | 30 | 10 |
1800 | 72 | 350 | / | 25 | 35 | 30 | 10 |
2000 | 80 | 350 | / | 25 | 35 | 30 | 10 |
2200 | 88 | 400 | / | 25 | 35 | 30 | 10 |
2400 | 96 | 400 | / | 25 | 35 | 30 | 10 |
2600 | 104 | 400 | / | 25 | 35 | 30 | 10 |
2800 | 112 | 400 | / | 25 | 35 | 30 | 10 |
3000 | 120 | 400 | / | 25 | 35 | 30 | 10 |
注:1、特殊要求可按用户图纸制作,法兰标准采用9115.1-2000,可选配(GB、JB、HG、CB、ANSI、DIN、BSEN、NF、EN、JIS、 等)法兰标准生产。橡胶球体可做天然橡胶、三元乙丙橡胶、氯丁橡胶、丁基橡胶、丁晴橡胶、氟橡胶等。 2、悬空给水使用DN200以上产品,管道必须有固定支撑或固定托架,否则产品应安装防拉脱装置。 3、用户使用橡胶接头,对应法兰应是阀门法兰或符合9115.1(RF)法兰。 Notes: 1. For OEM orders with special requirement, rubber joints can be made according to customers' drawings. Generally, flange standard is 9115.1-2000, other GB, JB, HG, CB, ANSI, DIN, BSEN, NF, EN, JIS, flanges are also available upon request. Material of rubber body can be NR natural rubber, EPDM, Neoprene, IIR butyl rubber, NBR Buna-N, FKM, etc. 2.When rubber joints size above DN200 are used for overhead water supply system, the pipes must be equipped with fixed supports or fixed brackets, otherwise control units shall be installed on rubber joints. 3.Matching flanges of rubber joints shall be valve flanges or 9115.1(RF) flanges. |
上一篇:云南省单球体橡胶接头厂家/云南省单球体橡胶接头供应商/云南省单球体橡胶接头质量/云南省单球体橡胶接头材质
下一篇:云南省昆明市五华区单球体橡胶接头/云南省昆明市五华区单球体橡胶接头生产厂家/云南省昆明市五华区单球体橡胶接头厂家/云南省昆明市五华区单球体橡胶接头价格
热度新闻
随便看看